Diamond J Customs
Specializing in Quad-Rodding and Suspension Kits
 
Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com

Honda TRX90 and TRX90X ATV Widening Kits

Order Now - Widening and Front and Rear Shock Conversion Kit  $180.00 incl. S&H

Order Now - Widening Kit Only   $140.00 incl. S&H (credit card or PayPal)

Additional Shipping Outside the U.S. :

The following amounts should be paid to cover additional shipping charges outside of the U.S., Guam and Puerto Rico.  The amount covers any one of the above kits.

For Canada: $25.00 additional shipping (International Priority Mail)

For all other countries: $45.00 additional shipping (International Priority Mail)

Information about the product:

The difference between the "widening kit" and the "widening and shock conversion kit" is the top shock mount brackets.  The widening kit simply relocates the stock shocks outward to match the width increase to the a-arms.  The widening and shock conversion kit provides a range of vertical locations where the stock shocks can be mounted depending on how you assemble the shock brackets.  These adjustments will allow you to use longer shocks.  300EX stock or aftermarket shocks will work with the shock conversion kit.

BECAUSE OF THE NEW PLASTIC FRONT FENDER DESIGN ON THE NEW TRX90's, THIS KIT WILL NOT WORK ON A 2006 OR NEWER TRX90. THE NEW FENDERS ARE LOWER, AND DON'T LEAVE ENOUGH ROOM FOR THE 300EX SHOCKS. YOU WOULD NEED TO CUT HOLES IN THE TOP OF THE FENDERS TO ALLOW THE SHOCKS AND CONVERSTION BRACKETS TO PROTRUDE THROUGH. WE RECOMMEND OUR DUAL A-ARM CONVERSION KIT FOR THESE MODELS, WHICH ALLOWS YOU TO MOUNT THE COMPLETE FRONT SUSPENSION FROM A 300EX ON YOUR TRX90.

Stock brake lines should be long enough to install this kit if you disconnect the intermediate brake line support on the a-arms to provide more slack in the lines.

The rear shock conversion kit includes brackets that allow a FRONT shock from a 300EX to be used in the rear of the TRX90.  The front shock from a 300EX allows for more suspension travel and a softer ride than the stock rear shock.  This setup will work great for smaller riders (less than 150lbs), but may not provide enough suspension for heavier riders.

More general information about our widening kits by clicking on the widening kits button to the left.

Follow these links to go to our other products that will work on the TRX90.

Front Wheel Bolt Pattern Conversion Plates (4x85mm to 4x144mm)

Rear Wheel Bolt Pattern Conversion Plates (4x85mm to 4x110mm)

Universal (slotted) Front Wheel Bolt Pattern Conversion Plates

Universal (slotted) Rear Wheel Bolt Pattern Conversion Plates

TRX90 Rear Shock Conversion Kit

Additional Shipping Outside the U.S. :

The following amounts should be paid to cover additional shipping charges outside of the U.S., Guam and Puerto Rico.  The amount covers any one of the above kits.

For Canada: $25.00 additional shipping (International Priority Mail)

For all other countries: $45.00 additional shipping (International Priority Mail)

Rear Wheel Spacers (+2" Each Side)

 
| Home | About Us | All Products | Widening Kits | Shock Conv & Lowering Kits | Youth Conversion Kits | Wheel Spacers |
| Bolt Pattern Conv Kits | ATSki Conversion Kit | Misc / Parts | Assembly Instructions | ebay Store | Contact Us |


Copyright © 2009 Diamond J Customs, all rights reserved
Designed by NDTC