Banshee 350 Widening & Lowering Kit
Order Now: USA Canada Other Countries
+6.0" Front Widening & Lowering Kit $160 $180 $200
+4.5" Front Widening & Lowering Kit $160 $180 $200
Combination Kits: USA Canada Other Countries
+6.0" Front and +4" Rear Wid/Low Kit with Brakelines $380 $400 $420
+4.5" Front and +4" Rear Wid/Low Kit with Brakelines $380 $400 $420
+6.0" Front Wid/Low and +4" Rear Spacers Kit $280 $290 $310
+4.5" Front Wid/Low and +4" Rear Spacers Kit $280 $290 $310
+6.0" Front Widening & Lowering Kit with Brakelines $270 $280 $300
+4.5" Front Widening & Lowering Kit with Brakelines $270 $280 $300
The prices above for "USA" shipments include sales to any of the 50 states, plus Guam and Puerto Rico.
Canada and all other countries will use International Priority Mail.
Information about the product:
This kit is for a front widening and lowering kit for any year model of Yamaha Banshee 350 that has front a-arm suspension. Some of the older Banshees have J-arms, which we do not have a kit for (sorry).
The kit uses all of the same components as the Banshee widening kit, except the shock widening components are not included. By widening the mounts for the a-arms, but keeping the upper shock mounts in the stock location, the suspension "squats" and lowers the front of the ATV by about 3 1/2 inches on the +6 inch widening and lowering kit. The +4.5 inch widening and lowering kit lowers the front by about 2 1/2 inches.
As an option, this kit can also be used with YFZ 450 shocks as a widening and shock conversion kit. This will not lower the ride height. We show a picture below that shows some slight grinding that will need to be done to your Banshee shock mounts to allow the larger aluminum shock eyelets of the YFZ450 shocks to fit in the Banshee frame. These modifications are pretty minor, and they do not affect the strength of the shock mounts. Again, this is an option if used as a widening and shock conversion kit. If you use Banshee shocks (stock or aftermarket) with this as a widening and lowering kit, no grinding is required.
Follow this link to take you to our billet aluminum rear wheel spacers that will widen the rear of this ATV model. Rear Wheel Spacers (+2" Each Side)
Stock brake lines should be long enough to install either the +4.5” or the +6.0" kit.
Diamond J Customs does sell brake lines if you would prefer to use extended-length stainless steel braided brake lines with your widening kit.
More general information about our widening kits by clicking on the widening kit button to the left